Fulton Fire Department Community Smoke Alarm Installation Program

It is extremely Important that you have working and up to date smoke detectors in your home.  If you need free smoke detectors installed in your home call the:

Fulton Fire Department

Monday  thru Friday 8 am to 3 pm at 270-472-1423.

Replacing your smoke alarms

  • Replace all smoke alarms when they are 10 years old. To determine the age of your smoke alarm, look at the back where you will find the date of manufacture. Smoke alarms should be replaced 10 years from the date of manufacture.
  • Immediately replace any smoke alarm that does not respond properly when tested.
  • Replace combination smoke-carbon monoxide alarms according to the manufacturer’s recommendations.

Family activity: check your smoke alarms

Smoke alarm calendar tearsheet

Download a calendar tearsheet (PDF, 228 KB), and put it in an important place in your home. Remember to have a grown-up test your smoke alarms once a month. Tear off the correct month when the test is finished.

Installing your smoke alarms correctly – and making sure they are in working order – is an important step to making your home and family safer from fire.

Smoke alarm installation guideNEW! A smoke alarm installation program in your community can make a measurable difference in reducing deaths and injuries from fire. The updated “Planning and Implementing a Successful Smoke Alarm Installation Program” Web version (PDF, 1 MB) Print version (PDF, 5 MB) is a comprehensive guide including everything you’ll need to get started, from tips on how to select volunteers, to pointers on soliciting donations and publicizing your program.


It’s important to have enough smoke alarms in your home. Fire research has demonstrated that with today’s modern furnishings, fires can spread much more rapidly than in the past when more natural materials were used. Because of this, having a sufficient number of properly located smoke alarms is essential to maximize the amount of available escape time. For many years NFPA 72, National Fire Alarm and Signaling Code, has required as a minimum that smoke alarms be installed inside every sleep room (even for existing homes) in addition to requiring them outside each sleeping area and on every level of the home. (Additional smoke alarms are required for larger homes.) Homes built to earlier standards often don’t meet these minimum requirements. Homeowners and enforcement authorities should recognize that detection needs have changed over the years and take proactive steps make sure that every home has a sufficient complement of smoke alarms.

Installing smoke alarms
  • Choose smoke alarms that have the label of a recognized testing laboratory.
  • Install smoke alarms inside each bedroom, outside each sleeping area and on every level of the home, including the basement.
  • On levels without bedrooms, install alarms in the living room (or den or family room) or near the stairway to the upper level, or in both locations.
  • Smoke alarms installed in the basement should be installed on the ceiling at the bottom of the stairs leading to the next level.
  • Smoke alarms should be installed at least 10 feet (3 meters) from a cooking appliance to minimize false alarms when cooking.
  • Mount smoke alarms high on walls or ceilings (remember, smoke rises). Wall-mounted alarms should be installed not more than 12 inches away from the ceiling (to the top of the alarm).
  • If you have ceilings that are pitched, install the alarm within 3 feet of the peak but not within the apex of the peak (four inches down from the peak).
    Figure A.29.8.3.1 Smoke alarm installation
    Figure A.29.8.3.1 from NFPA 72, National Fire Alarm and Signaling Code (2013 edition).
  • Don’t install smoke alarms near windows, doors, or ducts where drafts might interfere with their operation.
  • Never paint smoke alarms. Paint, stickers, or other decorations could keep the alarms from working.
  • For the best protection, interconnect all smoke alarms. When one smoke alarm sounds they all sound. Interconnection can be done using hard-wiring or wireless technology.
  • When interconnected smoke alarms are installed, it is important that all of the alarms are from the same manufacturer. If the alarms are not compatible, they may not sound.
  • There are two types of smoke alarms – ionization and photoelectric. An ionization smoke alarm is generally more responsive to flaming fires, and a photoelectric smoke alarm is generally more responsive to smoldering fires. For the best protection, both types of alarms or combination ionization-photoelectric alarms, also known as dual sensor smoke alarms, are recommended.
  • Keep manufacturer’s instructions for reference.
Testing smoke alarms
  • Smoke alarms should be maintained according to manufacturer’s instructions.
  • Test smoke alarms at least once a month using the test button.
  • Make sure everyone in the home understands the sound of the smoke alarm and knows how to respond.
  • Follow manufacturer’s instructions for cleaning to keep smoke alarms working well. The instructions are included in the package or can be found on the internet.
  • Smoke alarms with non-replaceable 10-year batteries are designed to remain effective for up to 10 years. If the alarm chirps, warning that the battery is low, replace the entire smoke alarm right away.
  • Smoke alarms with any other type of battery need a new battery at least once a year. If that alarm chirps, warning the battery is low, replace the battery right away.
  • When replacing a battery, follow manufacturer’s list of batteries on the back of the alarm or manufacturer’s instructions. Manufacturer’s instructions are specific to the batteries (brand and model) that must be used. The smoke alarm may not work properly if a different kind of battery is used.

Interconnected smoke alarms increase safety

In a Consumer Product Safety Commission (CPSC) survey of households with any fires, including fires in which the fire department was not called, interconnected smoke alarms were more likely to operate and alert occupants to a fire.1 People may know about a fire without hearing a smoke alarm.

  • When smoke alarms (interconnected or not) were on all floors, they sounded in 37% of fires and alerted occupants in 15%.
  • When smoke alarms were not on all floors, they sounded in only 4% of the fires and alerted occupants in only 2%.
  • In homes that had interconnected smoke alarms, the alarms sounded in half (53%) of the fires and alerted people in one-quarter (26%) of the fires.